If you're looking for another product within the brands we stock and it's not listed on our product pages, be sure to contact us as it's likely we can order this product for you.

Krix Vortex Centre Speaker (timber veneer finish)
		Finishes Atlantic Jarrah American Cherry Black Ash
The Krix Vortex is based on the highly successful Epicentrix and has been designed to deliver perfect timbral matching to the Harmonix main speakers. This particular tweeter is also used in the Phoenix and Apex floorstanders and as such the Vortex can also be used with a wide range of Krix products. The dual 165mm bass drivers, single midrange and 28mm tweeter used in the Vortex are identical to those in the Harmonix ensuring the 'audio stage' is seamless in it's transition from left to right.  Focus is on vocal clarity, midrange depth and a dynamic bass response. Experience the sonic strength the Vortex will bring to your home theatre system. Specifications: Frequency Range: 35Hz - 20kHz in room response Power Handling: Maximum180 watts RMS amplifier power Sensitivity: 91dB for 2.83 volts at 1 metre Configuration: 4 driver 3-way bi-wirable/bi-ampable Bass Driver(s): 2 x nominal 165mm laminated polypropylene cones. 33mm voice coil wound on high powered aluminium former, with ventilated spider and aluminuim flux stabilization ring for low distortion Midrange Driver: 1 x nominal 130mm coated paper cone. 26mm voice coil wound on high powered aluminium former, using copper shorting ring and oversized magnet for lower distortion Tweeter: 28mm doped fabric dome. Ferro fluid cooled. Neodymium magnet Crossover Points: 340Hz & 2.1kHz Impedance: Nominally 4 ohms Enclosure Type: Dual bass chambers, bass reflex + sealed midrange chamber, front vented with internal / external flaring Dimensions: 230mm high x 725mm wide x 383mm deep (inc. grille) Material: 17mm MDF enclosure, heavily braced Finish: Vinyl or lacquered timber veneer Volume: 42 litres internal Weight: 24kg each