The Anthem Integrated 225 is sleek, its outlook minimalist. It doesn't call attention to itself in any overt way yet when it sits in the A/V rack, you can't help noticing just how good it looks. The inside story is similar: high-quality component parts; critical inputs are buffered to prevent crosstalk; a combination active/passive "EQ" technology in the phono stage unlocks all of the magic hidden in those vinyl grooves - with a transparency, refinement and detail that should be far more expensive, but isn't.
HIGH-QUALITY, CLOSE-TOLERANCE PARTS
As with all Anthem components, the Integrated 225 boasts all parts of high quality and close tolerance, including metal film resistors and high-quality film signal capacitors. The result is the lowest possible total harmonic distortion plus noise. To prevent one source from interfering with another, critical inputs are individually buffered.
BUILT-IN PHONO STAGE
Designed specifically to accommodate today's high-quality Moving Magnet phono cartridges, the Integrated 225's built-in phono stage will delight even the most die-hard vinyl enthusiast.
Since the job of the phono stage is to supply most of the gain, two factors are critical in achieving the highest level of playback quality: a superior approach to RIAA equalisation and the quality of amplification used to step-up cartridge output to line-level voltage.
The Integrated 225's phono stage benefits from a split active/passive equalisation topology. Active equalisation of the low-frequencies occurs at the 50 Hz and 500 Hz roll-off points (as defined by the RIAA equalisation curve). At the 2122 Hz mark (also defined by the RIAA curve) however, high-frequency equalisation remains passive. The original signal passes through the curve in tact and with perfect linearity; no musical information is lost or distorted and the nuances of the original recording remain completely preserved.
In an effort to keep component parts to a minimum within the signal path, the non-inverting series feedback topology in this stage is designed around only two dual high-quality op-amps. The first provides all of the gain, while isolating the feedback network from the cartridge to ensure accuracy in frequency response. The second is configured as a buffer, isolating the equalization filter network from the volume control to prevent even the tiniest variation in frequency response when the volume level is adjusted.
The final result? Exceptional retrieval of all of the magic hidden in those vinyl grooves … from a silent background emerges tight, accurate bass, lightning fast transients, and a high-frequency detail and extension that will leave the listener aching for more.
THE POWER WITHIN
The integrated 225's main power supply boasts an advanced generation toroidal transformer, a major contributor to the low-noise floor. This massive transformer is conservatively rated and designed with high rail voltage. It feeds two oversized (51 mm x 80 mm) low-ESL, low-ESR Nichicon filter capacitors employing a total capacitance of 30,000 microfarads. The main power supply also features +/-15 V rails for the preamp audio circuits fed by two precision voltage regulators. An additional precision voltage regulator is used in the standby power supply. The Integrated 225's main power supply is active during "on" mode while standby power supply remains active in both "on" and "standby" modes.
Input and voltage amplifier stages are a differential design, however the output power stage, the stage most crucial to ultimate playback, benefits from Anthem's proven output stage topology: a fully symmetrical complementary Class AB design with three pair of high-quality bipolar output devices per channel. Designed to dramatically reduce distortion, this arrangement also ensures extreme linearity, effortless response and extensive bandwidth while minimizing power consumption.
HEATSINKS … COMPUTER-DESIGNED AND MODELED
Large custom heatsinks, one for each amplifier channel, ensure that the Integrated 225 dissipates heat quickly and efficiently. Computer designed and modeled, their job is to maximize heat transfer for efficient heat dissipation. The resulting cool operation means long term dependability and "no fans required."
105 dB SIGNAL-TO-NOISE RATIO
With a 105 dB signal-to-noise ratio, the Integrated 225 rivals the achievements of more expensive separates. Anthem's always meticulous attention was paid to groundplanes and the design of the power supply (see section on Power Supply). Circuit board traces were laid out by hand. From a rich and silent black background, the only thing the audiophile is aware of is the music - rich and refined, full and enveloping, leaving you to wonder why anyone would contemplate spending more.
AN ANALOGUE APPROACH TO VOLUME
In keeping with its audiophile purist roots, the Integrated 225 features a large motorized analogue potentiometer style volume control which tracks exceptionally well, rivalling the performance of a stepped attenuator. Volume can be adjusted three ways: manually, with the remote control, or through the RS-232 interface.
TONE CONTROLS WITH BYPASS FEATURE
The Anthem Integrated 225's bass and treble controls have been designed to affect the tonal extremes in a fairly undramatic way. They are particularly useful for taming poor recordings, without upsetting the musical balance. To adjust tone, Bass and Treble knobs are provided on the front panel. And for the purist (and the best recordings), the option is there to bypass these controls completely.
HIGH-QUALITY OUTPUT CONNECTIONS
The Integrated 225's robust binding posts ensure full and uninterrupted power delivery to the loudspeakers at all times. They're very easy to use and will facilitate large speaker cable connections. In addition to these speaker outputs, the Integrated 225 also includes Pre-out (for possible bi-amping applications) and Rec-out line level outputs.
A TRIGGER RESPONSE
The Integrated 225's trigger feature allows the unit to be turned on or off remotely via a trigger from another component or control system. The 3.5 mm mini-jack input receives a 12 V signal from the upstream component or system controller. The same trigger signal can be linked to other components through the trigger output.
PORTABLE MEDIA INPUT PLUS 7 MORE INPUTS!
A handy portable media input plus seven more stereo audio inputs include: Phono, CD, Balanced, AUX 1, AUX 2, AUX 3, and Recorder (Tape In). Each input can be connected via pairs of RCA connectors on the back panel of the Integrated 225, with two exceptions. The Balanced Input consists of two XLR connectors on the back panel and a portable media input is a 3.5 mm stereo jack and selector located on the front panel for quick and easy access. Any one of the inputs can be selected by pressing the appropriate button via the front panel, remote control or RS-232 command.
XLR BALANCED CONNECTION AND GOLD-PLATED INPUTS
XLR balanced connections are common in both professional recording studios and broadcasting to ensure the lowest level of noise and hum. Now you can use this same high-quality connection since the Integrated 225 includes an XLR balanced input. Gold-plated female RCA jacks on this unit also provide high quality single-ended input connections.
The phono preamplifier is suitable for moving magnet and high-output moving coil cartrIdges.
- Input Impedance: 47 ko
- Input Capacitance: 100 pF
- Maximum Input: 18 mV at 20 Hz, 140 mV at 1 kHz, 160mV at 20 kHz
- Gain (at 1 kHz): 35 dB
- Crosstalk (at 1 kHz): 80 dB
- RIAA Response: +/- 0.5 dB (100 Hz to 20 kHz); -1 dB (20 Hz)
- THD+N (at 1 kHz, 5 mV input): 0.05%
- S/N Ratio (ref. 5 mV at 1 kHz, IEC-A filter): 83 dB
- Input Impedance: 30 ko
- 'Pre-Out' Output Impedance: 560 ohms
- 'Rec-Out' Output Impedance: 100 ohms
- Rated Input: 1.0 Vrms
- Maximum Input: 7.6 Vrms
- Minimum Load: 5 ko
- Rated Output (100 k1 load): 1.0 Vrms
- Maximum Output (100 k1 load): 7.6 Vrms
- Headphone Output: 500 mW into 32 ohms at 0.03% THD+N
- Channel Separation (at 1 kHz): 75 dB
- Crosstalk Between Inputs (at 1 kHz): 72 dB
- XLR Pin Configuration: Pin 1 - Ground; Pin 2 - Positive; Pin 3 - Negative
- Frequency Response and Bandwidth: 20 Hz to 20 kHz (+0, -0.1 dB); 1 Hz to 170 kHz (+0, -3 dB)
- THD+N (at rated input and output, 80 kHz BW): 0.003%
- IMD (CCIF at 15 kHz and 16 kHz): 0.0005%
- S/N Ratio (A-weighted, ref 2.0 Vrms): 105 dB
(per channel, continuous RMS, 20 Hz to 20 kHz, <1.0% THD)
- Frequency Response: 20 Hz to 20 kHz (+0, -0.15 dB)
- Bandwidth: 1 Hz to 200 kHz (+0, -3 dB)
- THD+N: 0.01% at 1 kHz, 0.03% at 20 kHz (100 W into 8 1)
- Power Bandwidth: < 10 Hz to 100 kHz (+0, -3 dB, 200 W into 8 1)
- Slew Rate: 25 V/us
- Headroom: 1.4 dB (8 1), 2.8 dB (4 1)
- Damping Factor: 80 at 1 kHz (ref. 8 1)
- S/N Ratio (A-weighted, ref 225 W): 105 dB
- Crosstalk: > 57 dB (100 Hz to 10 kHz)
- Voltage Gain: 29 dB
- Width: 14.9 cm including feet
- Height: 43.8 cm
- Depth: 45.7 cm
- Weight (Unpacked): 19.4 kg