Stereophonic reproduction involves the separation of the left and right audio channels. So why then do most "stereo" radios closely-space two speakers in a single cabinet? The two-piece Model Two does stereo right and left. Placing the matching companion speaker, with its 15 feet of cord, several feet from the main unit provides the detailed imaging and accurate soundstage that is so essential for true stereo reproduction.
The Model Two carries forth the same GaAs MES-FET tuner technology used in the Model One, 5:1 ratio analogue tuning dial for easy and accurate tuning, and the same inputs and outputs as the Model One, but with several important additions: A mixing input permits audio from your computer to be mixed in with the radio.
There is also a dedicated subwoofer output (for the optional matching Model Subwoofer) and a balance control. The bass ports are located in the rear to accommodate vertical positioning where space is tight. For added convenience, the front source knob has an auxiliary position, making it easier to hear our optional matching Model CD or other device.
The Model Two is definitely not your stereotypical stereo radio. Mate the Model Two with the matching Model Subwoofer and/or Model CD and you have a first-rate, high fidelity stereo system.
Each Platinum Series Model Two features a hand-lacquered, high gloss wood cabinet. These hand-crafted cabinets go through a lengthy, multi-layer process to achieve their rich lustre and elegant finish.
Specifications:
- AM/FM Stereo Table Radio w/Companion Speaker
- State of the art, discrete component stereo FM tuner featuring GaAs MES-FET mixer
- Analogue tuning system with geared down (5-1) tuning dial, LED indicator for precise tuning
- Multi-stage frequency contouring circuit to precisely adjust speaker's output over half-octave increments
- Heavy-duty, long-throw, three-inch speaker driver; ported enclosure design
- Built in AM and FM antennas
- Type F jack on rear panel for external FM aerial
- 12-volt jack on rear panel for external power supply
- 3.5mm socket on rear panel for headphone and recording output
- 3.5mm socket on rear panel for auxiliary input
- 3.5mm socket on rear panel for mixer input
- Dimensions 11.4cm high x 21.2cm wide x 13.3cm deep
Finishes:
